Fabric Scrap Projects, Hello Kitty, Liberty London

Liberty Scrap Mannequin Pin Cushion

Share this on:

Today’s post is another fabric scrap project using the free mannequin pin cushion pattern from DIY Dish. I am using my beloved Liberty London fabric scraps but this can be done using any fabric scraps you have on hand. This project is a good way to use up your fabric scraps and have a functional and decorative item in your sewing area. Also check out my other fabric scrap projects here.

DIY Dish has a great video on how to sew together the pattern here. I am going to review a few things that differ from the instructional video when I made my pin cushion.

I had these lovely scraps I purchased from Alice Caroline Supply mentioned in my Liberty fabric source guide post. Interesting enough they were all cut offs from hexagons. I wanted to mention this to show that even oddly shaped scraps can be used for this project.

UPDATE 4/2/2015: I’ve have Liberty scrap packs in my Etsy shop so you can buy some lovely scraps to make your own Liberty pin cushion.

Alice Caroline Supply scraps

I cut up the fabric into squares or triangles where I could and started sewing them together. As I pieced them together I put the pattern over my scrap piece to see if was big enough. After I had enough scrap pieces sewn together I cut out the pattern per the video instructions.

Liberty Scraps Sewn Together and Pattern Fit

Advertisement


 

Another modification I made was to add a skirt ruffle to showcase my Liberty Hello Kitty fabric mentioned in an earlier post . I cut roughly a 2 inch high by 17 inch wide strip of fabric and then gathered the strip (great gathering tutorial here). I folded up the bottom of the mannequin hem by 1 inch and sewed the gathered strip to to the bottom. Here is the view of the pattern sewn together on the inside and the outside with the ruffle.

Liberty Scrap Mannequin Pin Cushion In Progress

I didn’t have foam board so I traced the foam board pattern on a cereal box and then used a glue gun to glue the fabric to the cereal box base.  The instructions called to use mini Christmas ornaments but I couldn’t find any so I used a Darice craft wooden knob I found at Joann Fabric and painted it with a mix of brown and black paint to match the tapered candle holder base I bought from Target.

Craft Paint and Darice Wood Knobs

Finally, my finished mannequin pin cushion. It’s almost too nice to put pins in! Please drop me a comment on your pin cushion creation if you decide to give this a try. Happy sewing.

Mad For Fabric Liberty Fabric Scrap Mannequin Pin Cushion

Mad For Fabric Liberty Fabric Scrap Mannequin Pin Cushion View 2

Mad For Fabric Liberty Fabric Scrap Mannequin Pin Cushion Side View

Advertisement


Tagged , , ,

14 thoughts on “Liberty Scrap Mannequin Pin Cushion

  1. Very cool! I would love it if you joined and contribute your awesome posts at my link party at City of Creative Dreams, starts on Fridays 😀 Hope to see you there at City of Creative Dreams Link Party.

  2. I don’t think this could be any more lovely! What a fantastic use of those teeny tiny bits of precious loveliness. To think they could have ended up in the bin! Thanks for the link to the pattern too. I have a friend whose daughter has just moved out so she finally has a sewing room – I must make her this as a sewing room warming present!

  3. Thank you for sharing this post at City of Creative Dream’s City of Links on Friday! I appreciate you taking the time to party with me. Hope to see you again this week 🙂

Comments are closed.